{Guide} Fix Kmode Exception Not Handled Error in Windows? – 0x0000001e

Are you desperately looking for ways to get rid of Kmode Exception NOT Handled error?

Well, most of you people don’t know when Windows will show the Blue Screen of Death Error with the message kmode exception not handled. We all know that Windows is one of the best-operating systems; however, at the same time, it’s weird and does have a little complication which forces you to see BSoD.

So, before moving further, I would first like to share some more information about the Blue Screen of Death, which will help you understand why this error occurs and what are the different codes with which the BSoD is associated.

TYPES OF BLUE SCREEN OF DEATH WINDOWS 10

Here are some the error examples which include:-

1. DIVIDE_BY_ZERO_ERROR

This error occurs when an application tries to divide by zero.

2. IRQL_NOT_LESS OR_EQUAL

It’s an actual hardware conflict or a buggy device driver.

3. KMODE_EXCEPTION_NOT_HANDLED

This BSOD error is caused by an inaccurately configured device driver.

4. REGISTRY_ERROR

This is caused by System registry failure.

5. INACCESSIBLE_BOOT_DEVICE

The Blue Screen of Death occurs because Windows is unable to read Hard Disk.

6. UNEXPECTED_KERNEL_MODE_TRAP

Check complementary metal-oxide-semiconductor (CMOS) for the correct amount of random access memory (RAM) and single inline memory modules (SIMM) for speed and type

7. BAD_POOL_HEADER

This is a recently introduced error. So, no additional information is available.

8. NTFS_FILE_SYSTEM

The NTFS indicated the Hard Disk and this particular error occurred because of hard disk corruption.

See also: You can look for some additional Blue Screen Of Death Error Code from here.

Despite the seriousness of triggering a blue screen of death, it is quite a minor error. So, to fix this error here are a couple of ways depending on what is causing it.

WHAT IS KMODE_EXCEPTION_NOT_HANDLED ERROR IN WINDOWS 10?

The Kmode_Exception_Not_Handled is a Blue Screen of Death error message, which is also known of its Insect Check Error Signal Value of 0x0000001E. Fundamentally, this error occurs as a result of driver failures such as – an obsolete damaged or incompatible driver, and the system gets caught in the reboot loop and much more.

Overclocking programs, obsolete drivers, or recently overclocked tune are some of the reasons why BSoD is repeatedly occurring. Program Reboot, the system gets caught in a cycle which makes it difficult to use any computer are some of the examples of Kmode exception. Sometimes, the trigger could be a lousy driver, support, or bad firmware.

Moreover, in most of the situation, an incompatible driver or equipment may be the primary reason behind the Kmode_Exception_Not_Handled Windows 10. Well, you can find out the issue efficiently using the Device Manager and on top of all one of the easy ways to fix this issue is a Safe mode.

WHAT IS BLUE SCREEN OF DEATH?

Blue Screen of Death or BSoD or a stop code has been present in Windows NT 3.1 and all the Windows operating systems related afterward. It is an error that is being displayed on a Windows computer due to a fatal system error, which is also known as a system crash.

The Blue Screen of Death or BSoDs can be caused because of poorly written device drivers or malfunctioning of hardware, for example, faulty memory, power supply outrages, overclocking of hardware beyond its specified limits. Moreover, the BSoDs can be caused due to incompatible DLLs or bugs in the operating system Kernel.

Note: The BSoD errors are common because of instability and lack of memory protection in Windows 9X.

REASONS BEHIND KMODE EXCEPTION NOT HANDLED OCCURRENCE IN WINDOWS?

Well, this particular error can be caused due to the incompatibility of your Hardware, Firmware or any other software. However, here are some of the common things which are causing this BSoD –

1. Faulty or Incompatible third-party software.

2. Incompatible drivers & Hardware.

3. Falsely configured hardware.

4. Corrupted system files.

5. Corrupted RAM

So, these are some of the most common reasons behind Kmode_Exception_Not_Handled. Now, to solve this, we have created a manual guide that will help you get rid of this error.

METHOD 1: UPDATE DRIVERS TO FIX KMODE EXCEPTION

Since Kmode_Exception_Not_Handled error is most likely to be caused by a driver problem, therefore updating the device driver might fix this problem.

Well, this very much dependent on your system and fortunately Windows gives you an indication of what the miscreant will be. When the Blue Screen of Death occurs, you’ll typically see “Error Code – Kmode Exception Not Handled.”

So, first, you have to search for the driver which is creating issues and then follow the given below guide.

Step 1. Initially, reboot your system into the ‘Safe Mode.’ So, do this you need to press the F8 key while Windows is starting up.

Note: Remember that booting your system into Safe mode is important as Blue Screen will interrupt this procedure in Normal Mode. Also, if you’re facing any issue Booting in Safe Mode, you can Google out the procedure for your operating system.

Step 2. Once your system successfully started in Safe Mode, press the “Windows+X” button simultaneously. A sidebar will appear, and from there you can choose ‘Device Manager.’

Kmode Exception Not Handled 1

Step 3. Under the Device Manager window, look for Other devices and expand it by tapping.

Once you expand, you’ll find Unknown Device, right-click on it and then click on the ‘Update Driver Software’ option.

Kmode Exception Not Handled 2

Step 4. Open Update Driver Software and click on the first option stating “Search automatically for updated driver software.”

Kmode Exception Not Handled 3

Step 5. Relax until your driver gets updated. Once done, restart your system so that all the changes take place.

Blue Screen of Death

This particular method might solve the issue on your PC. However, if the problem continues, you can try other methods to resolve the error.

METHOD 2: DISABLE FAST STARTUP TO FIX BLUE SCREEN OF DEATH

One of the primary reasons for this issue is probably Windows 10’s Fast Startup. Basically, the fast startup is the Windows feature that allows for a speedy recovery from hibernation and shutdown.

Well, disabling Fast Startup might do the work. It can help your system to stay up for a longer duration, or even fixes the problems completely.

Follow these steps to disable Fast Startup carefully:-

Step 1. Open Start Menu and type ‘Control Panel’ to open it.

Step 2. Now go to Power Options and under that “Choose what the power buttons do.”

Blue Screen of Death

Step 3. Once done, click on “Changed settings that are currently available.”

Windows Kmode Error Fixed

Step 4. Under the Shutdown Settings, you will find ‘Turn on fast startup (recommended)’ simply uncheck the box.

Windows Kmode Error Fixed

Step 5. Tap on “Save Changes” to save and exit.

Check whether the Kmode Exception Not Handled Windows 10 error is gone or not.

Now, if the error is still occurring, then you should check for RAM Problems or its module which are responsible for this BSoD error.

METHOD 3: QUICKLY FIX ERROR WITH WINDOWS MEMORY DIAGNOSTICS

The next method which will help you get rid of this issue is Windows Memory Diagnostics. This method will identify and repair the error caused when the problem is occurred due to any wrong activity in the memory.

Step 1. Open Control Panel on your system from the Start Menu.

Windows Kmode Error Fixed

Step 2. Once you have opened Control Panel look for the ‘Administrative Tools.’

Now, under the administrative tool find the ‘Windows Memory Diagnostic’ option.

Windows Kmode Error Fixed

Step 3. After opening Windows Memory Diagnostics, you have to choose the option stating ‘Restart now and check for problems.’ As soon as you select the option, your PC will restart and diagnose the memory for errors.

Solutions to fix Kmode Exception Error

Step 4. Wait until the process is finished.

Now, if the method doesn’t work, you can try fixing damaged system files to get out of this problem.

METHOD 4: ANALYSE HARD DISK CORRUPTION (CHKDSK/F)

The most common error due to which Blue Screen of Death can be attributed is hard drive corruption. Your system will automatically develop this error on the hard disk because of repeated, unintended misuse, improper shutdowns, or sometimes due to an incomplete installation of software & hardware failure.

Follow the steps to get rid of this particular error:-

Step 1. Initially, you have to run Command Prompt as Administrator.
Right-click on the Command Prompt and run as ‘Administrator.’

Step 2. Once the Command Prompt opens type the following command – “chkdsk/f” and then hit the ‘Enter’ button.

Step 3. Sit back and relax until the “Check Disk Utility” entirely scan your Hard Disk and find any corrupted files which are causing conflict 0x0000001e and thus stop further errors.

If none of the above methods work for you to fix Blue Screen of Death, then you can try reinstalling the Windows on your system.

METHOD 5: REINSTALL THE WINDOWS TO FIX THE ERROR

If none of the above methods work for you, the last resort is you have to reinstall the Windows which surely removes all the problems from your PC. Do perform reinstalling of Windows you must have Windows CD or a USB Flash Drive.

WHAT WILL YOU EXPERIENCE WHEN KMODE EXCEPTION NOT HANDLED OCCURS?

Well, if your PC gets affected by unexpected Blue Screen of Death Error, then you must see the following symptoms:-

1. Your PC will slow down and sometime might be hanged on any stage for a few seconds or minutes.

2. Your PC will suddenly appear with Blue Screen of Death which shows you Stop Code 0x0000001e.

3. Whenever your PC shows you this error code, it might be restarted automatically.

4. The error occurs when you try to run a specific program.

5. Your PC shows the error code it might be caught into a reboot loop automatically.

Unfortunately, if your PC interrupts with the BSoD frequently, then this might be a serious issue. Therefore, you must quickly take the necessary steps to repair this Windows BSoD.

Note: The Kmode Exception error might temporarily hit you and goes away automatically.

THE CONCLUSION – BLUE SCREEN OF DEATH

Well, we have shared the best methods to fix Kmode Exception Not Handled error in Windows. Now, if the failure continues, then you must reinstall the Windows on the system. However, if that doesn’t work then do remember that your BIOS version might be one which is creating issues.

Is the above guide helpful?

We hope that we’re able to solve the query. Also, tell us which according to you is the best way to fix the Kmode Exception Not Handled error for Windows 10 and Windows 7

For any queries, suggestions or doubts do let us know in the comment section. We’ll be happy to assist you!

Leave a Reply